The Touch Screen IAQ Profile Monitor is a stand-alone Indoor Air Quality (IAQ) monitoring unit, capable of continuously monitoring multiple IAQ parameters. Sensor readings are displayed continuously and in real time.
The Touch Screen IAQ Profile system has been designed to give a visual representation of indoor air quality in a building, as part of the buildings management standards in relation to conditions such as Sick Building Syndrome.
The user is able to navigate through the various sensors simply by touching the panel. The touch screen software allows simple control and navigation; the user can view the data graphically, create monitoring schedules, produce reports and statistical data, as well as enable alarm functions and notifications for more effective and economical building management.
- A compact Indoor Air Quality (IAQ) monitor for use as part of a buildings management standards.
- Built in ‘touch screen’, displaying current IAQ parameters in the building.
- Wall mountable using standard VESA wall bracket
- The unit includes a built in USB port for downloading data quickly and easily.
- Each unit is configurable with up to 8 parameter sensors.
- May be used as a stand-alone monitor or as part of a wider IAQ monitoring network.
The Touch Screen IAQ profile monitor can be configurd with WiFi and or GSM modules. The Wifi module allows you to connect the IAQ monitor to your home/office network with the ability to download sensor data from the unit to another computer. If the IAQ monitor is not within reach of any Wifi network, then you can download the data using the built in USB socket loacated on the side of the instrument. The optional GSM module allows you to receive status updates and alarm alerts from the unit via text message to a mobile device. This early warning system allows you to keep right up to date with what the IAQ monitor is sampling, and also acts as an advance warning for staff working in the vicinity.
- Formaldehyde **Satellite Unit only
- Glutaraldehyde **Satellite Unit only
- Nitrogen Dioxide (NO2)
- Carbon Monoxide (CO)
- Carbon Dioxide (CO2)
- Sulphur Dioxide (SO2)
- Total Volatile Organic Compounds (TVOC’s)
- Methane (CH4)
- Ammonia (NH3)
- Ozone (O3)
- Water (H20) single zone sensing cable
- Smoke Sensor
* Other sensor options available
** Satellite units can be in the form of a Mini IAQ Profile Monitor or Large IAQ Profile Monitor which transmit to the Touch Screen IAQ Profile monitor. Sample data from these units can then be viewed on the Touch Screen IAQ monitor.
The IAQ Profile Monitor incorporates a variety of advanced gas sensor technologies to monitor the target gases including NDIR, PID and Electrochemical.
|Mains Powered||12v DC via external DC adaptor with 2.5mm diameter jack plug|
|Operating Range||0-30oC, 15-90%RH|
|Dimensions||240mm x 240mm x 55mm (Houses up to 8 sensors)|
|Easy to Install||Unit easily wall mounted via VESA standard bracket|
Exclusive management software built specifically for the touch screen IAQ profile monitor
No setup required. Easy navigation between sensor readings using touch.
|Sampling Rate||Up to 8 parameter data values every minute|
|Modules|| Zigbee Module. Wifi Module (IEEE 802.11b/g/n) GSM module. Low Power.
2.4GHz ISM Band Reciever
|Different Antennae Options||For the different network coverage required|
|Data Rate||ZIGBEE – 250kbit/s over the air / WIFI – 150Mbps|
|Channels||ZIGBEE – 16 channels (802.15.4 Channel 11 to 26)|
|Power||ZIGBEE – +3dBm Output power (+5dB Boost mode) / WIFI – 19dBm|
|Sensitivity||ZIGBEE – High sensitivity of -98dBm typical at 1% packet error rate / WIFI – -84dBm|
|Memory||ZIGBEE – 128k flash, 5kbytes of SRAM|