High Levels Suspended Solids

highlevelsuspendedsolidssensorSelf Cleaning Sensor for Suspended Solids and Turbidity Monitoring

The TurbiTechw² HR Sensor has been specifically designed for use in wastewater treatment systems where high levels of suspended solids are desirable in the aeration phase. Membrane Bio Reactors (MBR) typically run with MLSS values in the region of 8,000 to 14,000 mg/l. High MLSS concentrations promote numerous process benefits, including stable operation, complete nitrification, and reduced biosolids production reducing biological volume requirements (and associated footprint) to only 20-30 percent of conventional biological processes.

online-enquiry-buttonFor Specialist Advice Call:
+91 971-774-9249

  • The TurbiTechw² HR sensor is suitable for monitoring solids in higher ranges than the standard LA version of the sensor due to it’s shorter path length.

    In addition the sensor incorporates a self cleaning mechanism that ensures the optical surfaces are kept clean at all times, the cleaning system is designed to avoid problems with ragging and does not smear the optical system. The cleaning system ensures that manual intervention on a routine basis is not required, the sensor should simply be checked as part of general site housekeeping. The large optical surface and sample volume combine to ensure that the sensor is providing information that is reliable and representative of the solids present in the process. Deposits of fats and grease on the sensing area do not prevent the sensor from measuring unlike sensors with small optical surfaces

    The TurbiTechw² HR Sensor uses infrared light at 860 nm and operates using the Light Attenuation Principle. The cleaning mechanism uses a polyurethane wiper seal, sealed by 2 Nitrile ‘H’ Rings that finish the cleaning process. The Nitrile seals can be exchanged for Viton if the process media dictates. The cleaning process is automatically initiated by the 7300w² Monitor at a user determined frequency. The cleaning process takes only 90 seconds, which means that the sensor is available for 99.5% of the time with a 5 hourly cleaning cycle.

  • Physical
    Dimensions (hxwxd) Ø80mm, 470 mm long
    Weight 2.2 kg
    Protection Class IP68
    Enclosure Material Black Acetal Co-Polymer, 316 Stainless Steel, Glass
    Seal Material Polyurethane, Nitrile, with option of Viton
    Cable Entry Integral Cable Gland
    Cable Length 10 metres standard, 100 metres maximum

    Interface to Monitor
    Power Supply 12 VDC from Monitor
    Sensor Output ModTechw², RS485

    Environmental Data
    Operating/Storage Temperature 0 to 50ºC
    Location Indoor/Outdoor
    Pressure Rating 10 mWC
    Maintenance
    Service Seal Service every 3500 cleans (application dependent)
    Calibration The sensor is inherently stable, calibration should be carried out to suit the application. Our recommendation is every 6 months.

  • Measuring Characteristics
    Principal of Operation Light Attenuation/Scatter
    Wavelength 860 nm Infrared
    Accuracy Better than +/-5% of reading on real sample upto 30,000 mg/l
    Resolution Dependent on range setting, typically +/-2% of reading
    Display Resolution see 7300w² Monitor
    Response Time 0.5 seconds damping provided by monitor
    Flowrate Not affected by flowrate, avoid deadspots and extreme turbulence
    Units User Selectable mg/l, g/l, ppm, %SS
    Maximum Range 0-50,000 mg/l
    Minimum Range 0-10,000 mg/l
    The actual measuring range will depend on the nature of the sample being monitored. The upper range limit will be affected by the nature of the solids being monitored and cannot be guaranteed.

  • Part Number with Description
    223882 TurbiTechw² HR Sensor (Cable Length: 10 metres, Nitrile Seals)
    223884 TurbiTechw² HR Sensor (Cable Length: 20 metres, Nitrile Seals)
    223883 TurbiTechw² HR Sensor (Cable Length: 10 metres, Viton Seals)
    223885 TurbiTechw² HR Sensor (Cable Length: 20 metres, Viton Seals)
    Mounting Shafts
    152703 FlexTech Mounting Shaft (TurbiTechw² LA/HR/LS, 1.0 metres)
    152701 FlexTech Mounting Shaft (TurbiTechw² LA/HR/LS, 1.0 metres)
    152705 FlexTech Mounting Shaft (TurbiTechw² LA/HR/LS, 1.0 metres)
    Mounting Brackets
    223980 FlexTech Sensor Bracket (Handrail Ø 43 to 60.3 mm)
    224567 FlexTech Sensor Bracket Extension Assembly (500 mm Long, Handrail Ø 43 to 60.3 mm)
    Seal Service Pack
    220607 Seal Service Pack – TurbiTechw² HR, Nitrile H RIngs
    220608 Seal Service Pack – TurbiTechw² HR, Viton H RIngs



Online Enquiry Form


Your Contact Details



 I authorise Greentelligent Technologies LLP to contact me by telephone.

Subject

Your Message